It would but we dont' have 1" square dies. Now we only have 3/4" EMT (.93" round)
We'll have 1 3/8" round dies before too long.
One turn on the tension screw produces about a 12' diameter circle with 3/4" EMT
2 turns produces about 5' diameter.
You can produce a very small radius, less then 6" if need be.
2" square is to big to power with a drill motor. Our bender is limited to 3/4" square.
Disabled Categories are greyed out
Looks like your connection to Domegaia was lost, please wait while we try to reconnect.